Cold Circular Saw
Machinelist: Cold Circular Saw
Band Saw
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-6923 · Band Saw
KASTO - Vollautomat - PBA 320/460 - - unbekannt -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010690 · Band Saw
MEBA - MEBAswing 320 DG - - Neu -
Technical details
Equipment / Accessories: - Fast miter adjustment from 30° - 150° stepless, digital Miter indication to 0.1°. - Manual material tension. At each angular position of the saw frame is the Material tightened parallel in 90°. - MEBA - High performance package "HSS" version - Hydraulic lifting and lowering the saw frame and hydraulic clamping of the sawing material Stepless hydraulic cutting pressure and feed regulation Display lowering speed over scale. Display section via pressure gauge. Rapid traverse reduction of the saw frame via pushbutton to material edge - Frequency controlled AC drive 15-150 m / min - 3 kW - Hydraulic material full lift voltage - Machine stand with chip collecting tray - Sägebandantieb with limit switch - Precise saw band carbide roller guide, saw blade brush - Complete coolant device with electric submersible pump
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010932 · Band Saw
MEBA - MEBAswing 260 DG - - NEU -
Technical details
Equipment / Accessories: - Fast miter adjustment from 30° - 150° stepless to 0,5 ° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension. - End stops at 30° + 45° left and 30°+45° right - Manual material tension. At each angular position of the saw frame is the Material stretched parallel in 90° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - MEBA micro dosing system complete with spray head - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional equipment: - Hydraulic lifting of the saw frame
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-2170005 · Band Saw
MEBA - VOLLAUTOMAT - MEBAeco 335 DGA 2300 - - NEU -
Technical details
- The ergonomic panel control can be networked and offers various option packs * Teleservice for remote maintenance * Setting of sawing programs in the AV * Import of saw programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs available in almost all lengths - Exact positioning of the material using servo positioning technology - Forward-looking electric saw feed with ball screw: highest Cutting performance and quality, while being gentle on the saw blade - Consistent use of the most modern recirculating ball guides: smooth-running, highly resilient, low-maintenance and backlash-free - Unique and patented double miter system: material is always stretched at right angles - Insertion tongs can be extended as required in 1000 mm increments Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 3 kW - Hydraulic material full stroke clamping - Automatic movement of the vice - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servo motor - Visualized program input with CNC control - Integrated MEBA tong insertion system from 5-2300 mm per stroke with integrated roller conveyor *Optional equipment: - Laser light for cutting line indication/scribing saws - Driven chip brush - Micro dosing system - Job menu - MEBA NC Server comfort package - Scraper belt conveyor for optimal chip disposal, 2000 mm length - Installation elements (4 pieces) - Adjustable deflector plate 335 DGA
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010839 · Band Saw
ZIMMER - Z252/DG - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010840 · Band Saw
ZIMMER - Z252/DGV - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010260 · Band Saw
MEP - Shark 282 SXI EVO - - Neu -
Technical details
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically.
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010628 · Band Saw
MEP - SHARK 332-1 CCS - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010892 · Band Saw
ZIMMER - Z 241-1/R - - NEU -
Technical details
Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-10048 · Band Saw
MEP - Shark 281 CCS - - Neu -
Technical details
Domestic equipments: - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010270 · Band Saw
MEP - Shark 281 SXI EVO - - Neu -
Technical details
Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts - vise opens
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010838 · Band Saw
ZIMMER - Z 185-1/R - - NEU -
Technical details
Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-5282 · Band Saw
MEP - Halbautomat - Shark 281 SXI evo - - NEU -
Technical details
powerful, electro-hydraulic, semi-automatic band saw machine for Miter cuts from 0 ° to 60 ° left. Control modes: Semi-automatic operation (start / stop position of the saw bow is controlled by the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Control panel on vertical post, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text: Number of cuts (piece counter) + cutting time + power consumption of the Saw band motor + saw band tension in kg (minimum band tension = 900 kg) + Saw frame position (Y-axis) / alarms / faults (description and causes) + Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Underframe with lockable door and removable coolant tray, electric coolant pump. -Vise with quick adjustment -Schipping brush for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.)
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-6614 · Band Saw
MEP - Halbautomat - SHARK 512 SXI evo - - NEU -
Technical details
Powerful miter band saw for cuts from 60 ° right to 60 ° Left With saw band 34 x 1.1 mm (5.5 kW frequency converter, 4 kW belt drive motor) Electro-hydraulic semi-automatic machine with microprocessor control Functionality: -Semi-automatic operation (start / stop position of the saw bow is controlled via the Keyboard programmed. Vice closes / opens automatically, saw bow is automatically returned to the beginning of the cut) Features: -Stable, torsion-resistant and low-vibration saw frame made of cast steel - Carbide band guides for maximum cutting precision. Front, adjustable Tape guide holder on linear guides for easy, fast and accurate Adjustment for the cutting area -Large dimensioned deflection discs, adjustable made of cast steel -Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with precision stops at 0 ° / 45 ° / 60 ° and Table clamp for intermediate angles -Control panel, swiveling, contains all operating elements -Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: -Number of cuts (piece counter), cutting time, power consumption of the Saw band motor, saw band tension in kg (minimum band tension = 900 kg), Saw frame position (Y-axis), alarms / faults (description and causes), Diagnosis… -Saw band tension with band tension control and indication on the display by means of electronic converter -Frequency converter for stepless drive of the tool -Underframe with lockable door -Large, laterally pull-out chip tray and coolant container with 2 powerful coolant pumps, flushing nozzle with volume control for Removal of chips from the work area -Coolant gun to clean the machine -Vise with quick adjustment and exchangeable clamping and Stop jaws, lateral adjustment on linear guides - Chip removal brush, driven, for cleaning the saw band -Machine is prepared for all options (see price list). (Electric wire, Software etc.) Standard equipment: -Bi-metal saw band -Adjustable length stop 600 mm with millimeter scale Tool kit -Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view -Adapter for supply roller conveyor incl. 1 support roller - Entry option for forklift / pallet truck transport
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-3925 · Band Saw
MEP - Shark 282 CCS - - NEU -
Technical details
Powerful miter band saw for cuts from 45 ° right to 60 ° Left CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Manual cutting cycle AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring Stable, torsion-resistant and low-vibration saw frame made of cast steel Large, easily adjustable and mounted turntable, by means of central axis bolts centered turntable with indexing at 0 ° / 45 ° / 60 ° and inside Table clamp for intermediate angles Vice with quick adjustment Carbide band guides for maximum cutting precision Large deflection discs, adjustable, made of cast steel Hydraulic unit for the saw band tension and monitoring with display Manometer (belt tension = 900 kg) Clear switchboard with all controls Underframe with lockable door and removable coolant tray, electric coolant pump Chip removal brush for cleaning the saw band
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010710 · Band Saw
ZIMMER - Z 150/R - - Neu -
Technical details
Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010870 · Band Saw
ZIMMER - Z 185-1/R-400V - - NEU -
Technical details
Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-2170007 · Band Saw
BERG & SCHMID - GBS 250 Super AutoCut - - NEU -
Technical details
Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-4100 · Band Saw
BERG & SCHMID - GBS 218 Eco AutoCut - - NEU -
Technical details
Berg & Schmid metal band saw GBS 218 eco AutoCut robust 400 volts Metal band saw with continuously adjustable band speed, miter up to 60°, automatic cooling and AutoCut feed system - for sawing steel and stainless steel and aluminum profiles. AutoCut system: - Automatic saw frame lowering via the hydraulic cylinder with stepless Adjustable feed and limit switch at the end of the cut. - Fast lowering of the saw frame from the rest position to the workpiece, then switch to the normal saw feed (e.g. for marking). - Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). The brake cylinder allows the saw to be in any position during the return stroke be positioned.
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-4106 · Band Saw
BERG & SCHMID - GBS 305 AutoCut - - NEU -
Technical details
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010832 · Band Saw
ZIMMER - Z 151/R - - NEU -
Technical details
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-6969 · Band Saw
BERNARDO - HBS 275 - - NEU -
Technical details
Equipment: - For cutting profiles, pipes, solid materials made of iron - and non-ferrous materials - the saw frame can be swiveled up to 60 ° for miter cuts - Infinitely variable lowering via hydraulic lowering cylinder - Torsion-free, strongly dimensioned saw arm made of gray cast iron - 2 Saw band speeds for optimal cutting results (400 V) - robust Construction, therefore quiet and vibration-free running - automatic Limit switch-off according to material average - Robust vice made of gray cast iron with quick lock - ball-bearing saw band guide with quick adjustment to adapt to the workpiece width - guarantees an optimal work result Scope of delivery: - saw band - workpiece stop - underframe - manometer for Belt tensioning - Vice with quick lock - Coolant device - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch - Operating instructions in German - Chip clearing brush (Art-No: 04-1696)
- Heinz Sanders GmbH
- Fresenburger Weg 4
- 49779 Niederlangen
- Deutschland
-
+49 (0) 5939 9406 40
+49 (0) 5939 9406 50 -
maschinen@heinz-sanders.de
www.heinz-sanders.de
#1125-4576 · Band Saw
MEP - Halbautomat - Shark 282 SXI evo - - NEU -
Technical details
Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control and 4 Modes of operation Description: - Indexing at 0 ° / 45 ° / 60 ° and internal table clamp for Intermediate angle - Control panel on vertical post, swiveling, contains all Controls - Control with soft-touch keyboard, backlit display for display all machine parameters and messages in plain text, including: Number of cuts (piece counter) / cutting time / power consumption of the Saw band motor / saw band tension in kg (minimum band tension = 900 kg) / Saw frame position (Y-axis) / Alarms / Faults (description and causes) / Diagnosis… - Saw band tension with band tension control and indication on the display by means of electronic converter - Underframe with lockable door and removable coolant tray electric coolant pump - Vice with quick adjustment - Chip removal brush for cleaning the saw band Standard equipment: - Bi-metal saw band - Adjustable length stop 600 mm - tool kit - Detailed operating instructions, maintenance manual, circuit diagrams and Exploded view - Attachment adapter for supply roller conveyor incl. 1 support roller - Entry possibility for forklift / pallet truck transport
- Bästlein
- Augsburger Str. 56
- 89312 Günzburg
- Deutschland
-
+49 (0) 8221 93037-0
+49 (0) 8221 93037-29 -
info@baestlein.com
www.baestlein.com
#1123-5010773 · Band Saw
MEP - Shark 512 SXI EVO - - Neu -
Technical details
TOP Manufacturer:
MEP - HUVEMA - KALTENBACH - BERG & SCHMID - EISELE - BEWO - IMET - RURACK - TRENNJAEGER - EISELE - HALBAUTOMAT -