European network of stockholding machinery dealers
What search term would you use to search for this machine?
Injection-moulding machine (rubber)
BOY E35 VV
MEB Maschinenhandel GmbH
Schwalbenweg 4 · 30826 - Garbsen(0)5031 9394-634
www.meb-maschinenhandel.de
Machine data
Machine photos
_BOY.2037-B221102-11112022120549489.jpg "used Injection-moulding machine (rubber) BOY E35 VV")
_BOY.2037-B221102-15112022145333684.jpg "used Injection-moulding machine (rubber) BOY E35 VV")
Document
Keine weiteren Dokumente vorhandenTechnical details
| clamping force | 350 kN |
| injection volume | 58,5 cm³ |
| screw diameter | 28 mm |
| platen size | 260 x 254 mm |
Videos
Keine Video-Dateien vorhandenAdditional information
Condition: used,
Specification: injection moulding machine for TPE
- used
clamping unit:
- clamping unit: vertical
- clamping force: 350 kN
- opening stroke max.: 300 mm
- platen distance max.: 500 mm
- Mould installation height min.: 200 mm
- Clear width between tie bars: 260 x 254 mm
- Ejector stroke max.: 80 mm
- Clamping unit: VV
- Lift of protective bonnet: 500 mm
Injection unit:
- Screw diameter: 28 mm
- Screw L/D ratio: 18.6
- Screw stroke max.: 95 mm
- Injection volume max.: 58.5 cm³
- Injection pressure: 1577 bar
- Plasticising flow: 8.6 g/s
- Injection flow: 85.5 g/s
- Connected load: 3x 400 V, 50 Hz
- Max. heating power: 5.8 kW
- Drive power: 7,4 kW
- Total power: 13,2 kW
- Hydraulics: 210 bar (tank 65 litres)
- Operating hours approx.: 2.659 hours
Dimensions L/W/H approx.: 2,047 x 803 x 2,710 mm
Footprint: 1.7 m²
Weight approx.: 1,670 kg
Last maintenance: 01.2021
Incl. granulate conveyor and temperature control unit.
Specification: injection moulding machine for TPE
- used
clamping unit:
- clamping unit: vertical
- clamping force: 350 kN
- opening stroke max.: 300 mm
- platen distance max.: 500 mm
- Mould installation height min.: 200 mm
- Clear width between tie bars: 260 x 254 mm
- Ejector stroke max.: 80 mm
- Clamping unit: VV
- Lift of protective bonnet: 500 mm
Injection unit:
- Screw diameter: 28 mm
- Screw L/D ratio: 18.6
- Screw stroke max.: 95 mm
- Injection volume max.: 58.5 cm³
- Injection pressure: 1577 bar
- Plasticising flow: 8.6 g/s
- Injection flow: 85.5 g/s
- Connected load: 3x 400 V, 50 Hz
- Max. heating power: 5.8 kW
- Drive power: 7,4 kW
- Total power: 13,2 kW
- Hydraulics: 210 bar (tank 65 litres)
- Operating hours approx.: 2.659 hours
Dimensions L/W/H approx.: 2,047 x 803 x 2,710 mm
Footprint: 1.7 m²
Weight approx.: 1,670 kg
Last maintenance: 01.2021
Incl. granulate conveyor and temperature control unit.
On this page you will find a an offer on a used Injection-moulding machine (rubber) of type E35 VV of the company BOY with year of construction 2011 and with stock no.: 2037-B221102. The machine is manufactured by the company MEB Maschinenhandel GmbH from 30826 Garbsen offered. The delivery time / delivery status for this machine is: To be discussed For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Keine Video-Dateien vorhanden
Machine
Injection-moulding machine (rubber)
